안녕하세요?
CoreELEC 의 경우 내장 EMMC에 설치가 가능합니다.
일단 SD카드나 USB부팅을 통해 CoreELEC 를 부팅하고 쉘에서 커맨드를 통해 설치하는 방법입니다.
설치 방법은 2가지가 있습니다.
1. 안드로이드와 같이 공존
2. 단독 설치
CoreELEC 로만으로도 기본적인 부분이 가능하고, 특히 영상 재생은 안드로이드에서 제 성능이 나오지 않기 때문에 저는 설치를 단독설치로 진행할 예정입니다.
쉘로 접근하여 하기 명령을 입력합니다.
CoreELEC:~ # ceemmc -vx
Starting CoreELEC eMMC installation tool...
System is not supported: g12a_s905x2_2g_1gbit!
There is NO official support by Team CoreELEC
if you continue to run this tool!
Continue? [y]: y
eMMC size: 0x00073a000000 [32GB]
Original partition table:
[mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000 [4 MB], unkn
[mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000 [64 MB], unkn
[mmcblk0p03] cache offset 0x000006c00000, size 0x000046000000 [1120 MB], cache
[mmcblk0p04] env offset 0x00004d400000, size 0x000000800000 [8 MB], unkn
[mmcblk0p05] logo offset 0x00004e400000, size 0x000000800000 [8 MB], code
[mmcblk0p06] recovery offset 0x00004f400000, size 0x000001800000 [24 MB], code
[mmcblk0p07] misc offset 0x000051400000, size 0x000000800000 [8 MB], code
[mmcblk0p08] dto offset 0x000052400000, size 0x000000800000 [8 MB], code
[mmcblk0p09] cri_data offset 0x000053400000, size 0x000000800000 [8 MB], cache
[mmcblk0p10] param offset 0x000054400000, size 0x000001000000 [16 MB], cache
[mmcblk0p11] boot offset 0x000055c00000, size 0x000001000000 [16 MB], code
[mmcblk0p12] rsv offset 0x000057400000, size 0x000001000000 [16 MB], code
[mmcblk0p13] tee offset 0x000058c00000, size 0x000002000000 [32 MB], code
[mmcblk0p14] vendor offset 0x00005b400000, size 0x000010000000 [256 MB], code
[mmcblk0p15] odm offset 0x00006bc00000, size 0x000010000000 [256 MB], code
[mmcblk0p16] system offset 0x00007c400000, size 0x000074000000 [1856 MB], code
[mmcblk0p17] data offset 0x0000f0c00000, size 0x000649400000 [25748 MB], data
No CoreELEC installation found on eMMC
하기 1번 2번이 안드로이드와 공존하는 방법이며, 34번이 단독 설치입니다.
백업 파일이 없고 현 시스템을 그대로 옮기는 것임으로, 1번이나 3번을 입력하시면 됩니다.
Install in dual boot mode, CoreELEC and Android on eMMC
Use CoreELEC data from
[1] current used SD or USB device
[2] existing backup on current used SD or USB device
Install in single boot mode, only CoreELEC on eMMC
Use CoreELEC data from
[3] current used SD or USB device
[4] existing backup on current used SD or USB device
Please choose one option? [1/2/3/4]: 3
Free space of 'partition CE_FLASH': 512MB
Warning: Could not find 'dtbo' partition!
Free space of 'partition CE_STORAGE': 28988MB
New partition table:
[mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000 [4 MB], unkn
[mmcblk0p02] env offset 0x000000400000, size 0x000000800000 [8 MB], unkn
[mmcblk0p03] misc offset 0x000000c00000, size 0x000000800000 [8 MB], code
[mmcblk0p04] logo offset 0x000001400000, size 0x000000800000 [8 MB], code
[mmcblk0p05] dto offset 0x000001c00000, size 0x000000800000 [8 MB], code
[mmcblk0p06] reserved offset 0x000002400000, size 0x000004000000 [64 MB], unkn
[mmcblk0p07] CE_FLASH offset 0x000006400000, size 0x000020000000 [512 MB], data
[mmcblk0p08] CE_STORAGE offset 0x000026400000, size 0x000713c00000 [28988 MB], data
Used space of '/flash': 221MB
Used space of '/storage': 1302MB
There is enough free space on eMMC for installation!
Install CoreELEC on eMMC.
Continue? [y]: y
Moved 'env' from offset 0x00004d400000, size 0x000000800000 to offset 0x000000400000
Moved 'misc' from offset 0x000051400000, size 0x000000800000 to offset 0x000000c00000
Moved 'logo' from offset 0x00004e400000, size 0x000000800000 to offset 0x000001400000
Moved 'dto' from offset 0x000052400000, size 0x000000800000 to offset 0x000001c00000
Starting to format the new 'CE_STORAGE' partition...
mke2fs 1.45.3 (14-Jul-2019)
Discarding device blocks: done
Creating filesystem with 7420928 4k blocks and 1855952 inodes
Filesystem UUID: a8cb661f-0726-4480-891c-a4b60ddc4d91
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000
Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
Starting to format the new 'CE_FLASH' partition...
mkfs.fat 4.1 (2017-01-24)
Stopping Kodi before start of copy process!
Starting copying of data to the eMMC!
Please do NOT interrupt this progress till it's finished!
Copy all data from '/flash' to '/media/CE_FLASH'
221.41M 100% 23.49MB/s 0:00:08 (xfr#68, to-chk=0/71)
Syncthing, please wait...
Copy all data from '/storage' to '/media/CE_STORAGE/coreelec_storage'
1.30G 99% 13.18MB/s 0:01:34 (xfr#33807, to-chk=0/45391)
Syncthing, please wait...
Start Kodi again to have a user interface!
Success!
You can now power off the device, remove the used boot media (SD or USB) and
power on again to boot the device from eMMC!
작업이 완료되면 부팅 미디어로 사용했던 SD카드나 USB를 제거하고 reboot 을 합니다.
CoreELEC:~ # reboot
이후 부팅하여 용량 정보를 확인해보면 하기와 같습니다.
CoreELEC:~ # df -h
Filesystem Size Used Available Use% Mounted on
devtmpfs 988.5M 4.0K 988.5M 0% /dev
/dev/CE_FLASH 511.0M 211.3M 299.7M 41% /flash
/dev/loop0 192.0M 192.0M 0 100% /
/dev/CE_STORAGE 27.7G 1.4G 26.4G 5% /storage
tmpfs 993.3M 0 993.3M 0% /dev/shm
tmpfs 993.3M 9.6M 983.6M 1% /run
tmpfs 993.3M 0 993.3M 0% /sys/fs/cgroup
tmpfs 993.3M 2.6M 990.7M 0% /var
tmpfs 993.3M 0 993.3M 0% /tmp
/dev/sda1 14.8G 8.0K 14.8G 0% /var/media/sda1-usb-SanDisk_SanDisk_
overlay 27.7G 1.4G 26.4G 5% /storage/.kodi/userdata/addon_data/service.system.docker/docker/overlay2/95f5b995e18d00325c866d08ac3537cba31a22e20e394c502e1d978822426a4b/merged
overlay 27.7G 1.4G 26.4G 5% /storage/.kodi/userdata/addon_data/service.system.docker/docker/overlay2/8a4b6d6b4a54c9e81088e9f618ba481b7017dd3b729bd159aea97c2d960f1f53/merged
shm 64.0M 0 64.0M 0% /storage/.kodi/userdata/addon_data/service.system.docker/docker/containers/d8d36c1a3190db6e8022d4fd43a0ece6684f5265637f583bdc795ffb84b9d428/mounts/shm
shm 64.0M 0 64.0M 0% /storage/.kodi/userdata/addon_data/service.system.docker/docker/containers/9102cd68a1e286d30906eb06208037f17dff0c32f863a2e73e7f34a879f40898/mounts/shm
감사합니다.
'컴퓨터.전자기기' 카테고리의 다른 글
AMD 르누아르 레노버 LEGION 5 15-ARH (4800H / 1650) 세팅기 (1) | 2020.10.06 |
---|---|
원모어띵 에어프리 이어폰 사용 후기 (omthing airfree) (1) | 2020.10.04 |
GTMINI CoreELEC : 4. 백업 및 복구하기 (0) | 2020.09.19 |
GTMINI CoreELEC : 3. 파티션 용량 확장하기 (0) | 2020.09.19 |
GTMINI CoreELEC : 1. 설치하기 (MK802-COREELEC) (0) | 2020.09.14 |
댓글